Cooper & Hunter MIA 9,000 BTU Indoor Wall Mount, 115V, R454B - Ductless Mini Split Air Conditioner Heat Pump | No Kit

Name: Cooper & Hunter MIA 9,000 BTU Indoor Wall Mount, 115V, R454B - Ductles
Brand: Cooper & Hunter
SKU: CH-RLS09MIA-115VI-NO
Price: 252.0 USD
Availability: InStock

Cooper & Hunter MIA 9,000 BTU Indoor Wall Mount, 115V, R454B

Cooper & Hunter MIA 9,000 BTU Indoor Wall Mount, 115V, R454B – view 2

Cooper & Hunter MIA 9,000 BTU Indoor Wall Mount, 115V, R454B – view 3

Cooper & Hunter MIA 9,000 BTU Indoor Wall Mount, 115V, R454B – view 4

Cooper & Hunter7-Yr Warranty

CH-RLS09MIA-115VI-NO

Product specifications

Brand	Cooper & Hunter
Voltage	115V
SEER	21.2
WiFi	Included
Type	Wall Mount
Freon	R454B
Compressor	Inverter

See full Tech Specs

$252.00

Shipping Policy calculated at checkout.

Installation Kit: No Installation Kit

No Installation Kit 16FT Installation Kit 25FT Installation Kit 50FT Installation Kit

Product variants

Quantity

Delivery — free on orders over $300

Please note that all delivery dates and estimated transit times are approximate and are not guaranteed. Delivery times may vary due to carrier delays, weather, holidays, peak shipping periods, or other circumstances beyond our control. How delivery dates are calculated

Pickup available at Medley Warehouse

Usually ready in 24 hours

Mon–Fri, 9:00 AM – 4:30 PM

Questions about this system?

Answers in seconds — tap a question below

Sized for about the room's square footage at ~20 BTU per sq ft. Rule of thumb: ~20 BTU per sq ft, and 12,000 BTU = 1 ton (this unit is 9,000 BTU (0.75-ton)). Ceiling height, insulation, sun and climate shift that — if you're between sizes, size up for hot/humid rooms. Not sure? We'll confirm the right BTU for your space.
12,000 BTU = 1 ton — "tons" is just the older way of stating capacity. So 24,000 BTU = 2 tons, 36,000 = 3 tons, and so on. This system is 9,000 BTU (0.75-ton). BTU tells you the capacity; SEER2 tells you the efficiency.
It uses R454B — the newest low-GWP eco refrigerant, so it's future-proof and efficient. The outdoor unit ships pre-charged for a standard line set, so most installs need no extra refrigerant; your licensed, EPA-608-certified installer verifies the charge and tops it off if your line set is longer.
Rated SEER2 21.2 — a strong efficiency number, and the higher it is the lower your energy bills. Its inverter compressor ramps up and down instead of cycling on/off, so it holds the temperature steadily, runs quietly, and uses less power than a standard AC or window unit.
Runs on 115V — plugs into a standard household circuit, so no special high-voltage wiring is needed in most homes. That makes it easy to add to a bedroom, garage, office or addition without a costly electrical upgrade. Your installer still handles the final hookup and dedicated breaker.
Yes — a big upgrade. It's far more efficient (inverter, SEER2 21.2) and much quieter, since the compressor sits outside instead of in your window or on the floor. It mounts permanently, doesn't block a window, and heats as well as cools year-round. Higher upfront cost, but lower bills and a longer lifespan.
Yes to all three. It's an inverter heat pump — cools in summer, heats in winter (even in the cold), far more efficiently than electric heaters. A Dry mode also pulls out humidity, so rooms feel cooler and less muggy.
Yes — WiFi is included, so you can set schedules, change the temperature, and even turn it on before you get home, all from the mobile app (and pair it with voice assistants). A standard remote is included too.
It should be installed by a licensed, EPA-608-certified HVAC professional — we don't recommend DIY installation. Handling refrigerant requires EPA Section 608 certification under U.S. law, and professional installation keeps the system safe, code-compliant, and your manufacturer warranty valid.
Yes — you get full inverter heat-pump technology and the same core features as premium brands without paying for the name, which is how we keep prices low. Shipping is free on U.S. orders over $300, and our team can help with sizing and support.

The Cooper & Hunter MIA 9,000 BTU wall mount is a wall mount indoor unit for Cooper & Hunter MIA NY series ductless mini split systems, running on R454B refrigerant. It mounts in a single room or zone and is controlled independently with its included remote — pair it with a compatible outdoor condenser to complete your system.

Key Features

Wall Mount indoor unit for Cooper & Hunter MIA single-zone systems
9,000 BTU nominal capacity
Individually controlled with included remote — set its own temperature per room
R454B refrigerant
Inverter heat pump — cools and heats when paired with a compatible condenser

Works With

Connects to a compatible Cooper & Hunter MIA single-zone outdoor condenser, sold separately. Choose a copper line-set kit length at checkout, or supply your own.

Frequently Asked Questions

Is the outdoor unit included with this indoor unit?

No — this listing is the wall mount indoor unit only. It connects to a compatible Cooper & Hunter MIA single-zone outdoor condenser, sold separately.

What size room does it suit?

It is rated at 9,000 BTU — size it to your room’s square footage and insulation.

Does it heat as well as cool?

Yes — paired with a heat-pump condenser it both cools and heats from the same system.

What refrigerant does it use?

R454B, matching the system it connects to.

Who should install it?

A licensed HVAC professional — required for the refrigerant, electrical, and startup work, and to keep the warranty valid.

What warranty does it come with?

Backed by Cooper & Hunter’s 7-year compressor / 5-year parts limited warranty (with professional installation and registration).

Warranty & Support

Backed by Cooper & Hunter’s 7-year compressor / 5-year parts limited warranty. Professional installation and product registration are required to keep coverage valid.