HospitalityPTAC & PTHP Units (AC + Electric Heat/Heat Pump)
The gold standard for hotels, apartments, and assisted living—designed to slide easily into the universal 42" × 16" wall sleeve.
Select by Voltage and Efficiency and shop hospitality-grade options from Cooper & Hunter & OLMO.
PTAC & PTHP Units (Packaged Terminal Air Conditioners)
Straightforward, hotel-style climate control that drops into a standard sleeve. Explore the differences between PTAC (Cooling + Electric Heat) and PTHP (Heat Pump), learn how to size BTU, and see installation & maintenance best practices. Trusted brands like Cooper & Hunter and Olmo deliver reliable, hospitality-grade performance.
🛌 Hotels & Hospitality
🏢 Apartments & Condos
🏥 Assisted Living
⚡ 208/230V or 115V
⚙️ Universal Fit
Why choose PTAC for your property?
Hospitality spaces value fast change-outs, quiet operation, and easy housekeeping. PTAC/PTHP units are built for exactly that: front-service access, standardized sleeves, and durable controls.
✓
Turnover-friendly maintenance Swap chassis in minutes without disturbing the wall cutout or exterior aesthetics.
✓
Energy management options Thermostat lockouts, occupancy sensors, and temperature limits help cut energy waste significantly.
✓
Standardized form factor Fits the industry-standard 42" × 16" sleeve, making it easy to replace older units from various brands.
✓
Quiet comfort Modern units feature quiet-mode and sleep settings to reduce fan speed and compressor noise for guests.
Compare: PTAC vs. PTHP
PTAC uses electric resistance for heat. PTHP (Heat Pump) uses a reversible cycle for efficient heating in mild weather, switching to electric backup only when very cold.
Factor
PTAC (Electric Heat)
PTHP (Heat Pump)
Heating Method
Electric resistance strip
Heat pump + backup strip
Efficiency
Standard (Higher kWh)
High (Lower heating bills)
Best Climate
Warm / Cooling dominant
Mild to Cool winters
Upfront Cost
Generally lower
Generally higher
Ideal For
Budget installs, warm zones
Energy savings, 4-season use
Tip: Choose PTHP where winters are moderate to save on utilities. Choose AC-only PTAC if heating is rarely needed or budget is the primary driver.
How to size a PTAC unit (BTU)
Rule of thumb: Start with ~20 BTU per sq. ft. of room area. Adjust for high ceilings, sunny windows, or heavy occupancy.
Room Size (Approx)
Typical BTU
Common Application
300–400 sq ft
9,000 BTU
Studios, small hotel rooms
400–550 sq ft
12,000 BTU
Standard hotel / offices
550–800 sq ft
15,000 BTU
Larger suites / corner rooms
Adjustments: Add 10–20% for west-facing glass or high ceilings. For heating-dominant rooms, ensure the PTHP heating output meets the load.
Installation & Maintenance Tips
✓
Check Wall Sleeve & Grille Ensure the 42"x16" sleeve is level, sealed, and structurally sound. Replace damaged sleeves to prevent leaks.
✓
Verify Electrical Confirm voltage (115V or 208/230V) and amperage match the outlet. Never bypass the plug ground.
✓
Condensate Management Route drain per manual; keep traps clean to prevent odors and water damage.
✓
Routine Cleaning Rinse filters monthly. Inspect coils quarterly and clean with non-corrosive cleaner.
🎯 Looking for Great Prices on PTAC/PTHP Units?
Shop our selection of energy-efficient heating & cooling units. Whether you need a single replacement or bulk hotel supply, find trusted hospitality-grade performance at MiniSplitsForLess.
A PTAC (Packaged Terminal Air Conditioner) is a self-contained, through-the-wall AC system that provides cooling (and usually electric heat) from a single chassis. They are the standard for hotels and apartments.
⇄ What is the difference between PTAC and PTHP? ›
PTACs heat using electric resistance (effective but higher energy cost). PTHPs are Heat Pumps that use the compressor to heat efficiently in mild weather, switching to electric backup only when necessary.
📏 Are PTAC/PTHP units a standard size? ›
Yes. The vast majority of models are designed to fit the standard 42" wide × 16" high wall sleeve. Always verify dimensions on the specific model spec sheet before ordering.
# How do I size a PTAC unit? ›
Start with 20 BTU per sq. ft. (e.g., 400 sq. ft. = ~8,000 BTU, so choose a 9k unit). Add capacity for poor insulation, large windows, or high ceilings.
🛠 Can I install a PTAC/PTHP myself? ›
Slide-in replacements are straightforward if the sleeve is already there. However, electrical work and new sleeve installation should be done by a professional to ensure code compliance and weather sealing.
$ How much does a PTAC/PTHP cost? ›
Unit-only costs typically range from $700–$1,100 for AC-only PTACs and $850–$1,400 for PTHPs. Costs vary based on BTU size, brand, and features like corrosion protection.
Tip: Check voltage and plug type before ordering.↑ Back to top
Cooper & Hunter 15,000 BTU PTAC Air Conditioner, Heat Pump, Heating And Cooling w/ Electric Cord and RemoteFree Shipping
Cooper & Hunter 12,000 BTU PTAC Air Conditioner, Heat Pump, Heating and Cooling, w/Electric Cord and RemoteFree Shipping
Cooper & Hunter 9,000 BTU PTAC Air Conditioner, Heat Pump, Heating and Cooling, w/Electric Cord and RemoteFree Shipping
9,000 BTU PTAC OLMO Air Conditioner, Heat Strip, Heating And Cooling w/Electric Cord and RemoteFree Shipping
15,000 BTU PTAC OLMO Air Conditioner, Heat Strip, Heating And Cooling w/Electric Cord and RemoteFree Shipping
12,000 BTU PTAC OLMO Air Conditioner, Heat Strip, Heating And Cooling w/Electric Cord and RemoteFree Shipping
