Cooper & Hunter 9,000 BTU Inverter PTAC Air Conditioner, Heat Pump, Heating and Cooling, w/Electric Cord and Remote
Cooper & Hunter1-Yr Warranty
Product specifications
| Brand | |
|---|---|
| Voltage | |
| SEER | |
| EER | |
| WiFi | |
| Zone | |
| Type | |
| Freon | |
| Compressor |
Pickup available at 3550 Northwest 113th Court
Usually ready in 2-4 days
Questions about this system?
Answers in seconds — tap a question below
-
Sized for about 100–300 sq ft. Rule of thumb: ~20 BTU per sq ft, and 12,000 BTU = 1 ton (this unit is 9,000 BTU). Ceiling height, insulation, sun and climate shift that — if you're between sizes, size up for hot/humid rooms. Not sure? We'll confirm the right BTU for your space.
-
12,000 BTU = 1 ton — "tons" is just the older way of stating capacity. So 24,000 BTU = 2 tons, 36,000 = 3 tons, and so on. This system is 9,000 BTU. BTU tells you the capacity; SEER2 tells you the efficiency.
-
It uses R32 — an efficient, lower-GWP refrigerant that's now the industry standard on modern mini splits. The outdoor unit ships pre-charged for a standard line set, so most installs need no extra refrigerant; your licensed, EPA-608-certified installer verifies the charge and tops it off if your line set is longer.
-
Rated SEER2 22.0 — a strong efficiency number, and the higher it is the lower your energy bills. Its inverter compressor ramps up and down instead of cycling on/off, so it holds the temperature steadily, runs quietly, and uses less power than a standard AC or window unit.
-
Needs a dedicated 230V circuit, like a large household appliance, so it can deliver full capacity to larger rooms and multi-zone setups. Your licensed HVAC installer or electrician sets up the correct breaker and disconnect to meet local electrical code.
-
Yes — a big upgrade. It's far more efficient (inverter, SEER2 22.0) and much quieter, since the compressor sits outside instead of in your window or on the floor. It mounts permanently, doesn't block a window, and heats as well as cools year-round. Higher upfront cost, but lower bills and a longer lifespan.
-
Yes to all three. It's an inverter heat pump — cools in summer, heats in winter (even in the cold), far more efficiently than electric heaters. A Dry mode also pulls out humidity, so rooms feel cooler and less muggy.
-
Yes — WiFi is included, so you can set schedules, change the temperature, and even turn it on before you get home, all from the mobile app (and pair it with voice assistants). A standard remote is included too.
-
It should be installed by a licensed, EPA-608-certified HVAC professional — we don't recommend DIY installation. Handling refrigerant requires EPA Section 608 certification under U.S. law, and professional installation keeps the system safe, code-compliant, and your manufacturer warranty valid.
-
Yes — you get full inverter heat-pump technology and the same core features as premium brands without paying for the name, which is how we keep prices low. Shipping is free on U.S. orders over $300, and our team can help with sizing and support.
PTAC
Cooper&Hunter's PTAC (Packaged Terminal Air Conditioner) units offers a perfect blend of efficiency, reliability, and performance, ideal for a variety of commercial and residential applications. Whether you're outfitting a hotel room, office, or multi-family building, Cooper&Hunter's PTAC units provides powerful heating and cooling solutions, ensuring year-round comfort. Designed for easy installation, user-friendly operation, and minimal maintenance, these units are engineered to deliver consistent climate control with energy-efficient features that help reduce operational costs. With sleek, modern designs and advanced technology, Cooper&Hunter PTACs are the smart choice for dependable, affordable comfort.
Warranty and Tech Support Info
By selecting Cooper&Hunter products for your home or business, you’ll receive expert technical support from heating and cooling specialists, including product manuals, troubleshooting guides, and warranty information.
Warranty terms: The manufacturer provides a Limited Warranty of 7 years for the compressor and 5 years for parts.
Warranty terms
Main Features
Driven by next-generation inverter compressor technology, the Cooper & Hunter PTAC Inverter Heat Pump delivers up to 56% energy savings on cooling and 75% energy savings on heating versus standard PTACs, with up to 22 SEER2 efficiency. It holds 100% cooling capacity at 115°F outdoor ambient and 100% heating capacity at 5°F, and runs ultra-quiet down to 31 dB(A) in silent mode — up to 40% quieter than a standard unit. A Built-In Fresh Air Module with MERV 13 filtration brings filtered outdoor air indoors with no separate system needed, and features like automatic defrost, a front-access control board, washable filters, and corrosion protection keep maintenance simple. Ideal for hotels, apartments, and offices, it delivers stronger heating performance with lower operating costs and improved air quality.
All Accessories Included
With your purchase, you receive a complete, self-contained Cooper & Hunter Inverter PTAC unit ready to install into a standard 42-inch PTAC sleeve. Your package includes the PTAC Inverter heat pump unit, a wireless remote control, drain kit, and installation manual, plus a built-in Wi-Fi Smart Kit for app control. The wall sleeve and exterior grille are sold separately (or bundled at checkout) since most installations reuse an existing sleeve.
Technical Specifications
| Model | CH-PTI-09HP | CH-PTI-12HP | CH-PTI-15HP |
|---|---|---|---|
| Power Supply | 208/230,1,60 | 208/230,1,60 | 208/230,1,60 |
| Cooling — Rated Capacity | 9,000 Btu/h | 12,000 Btu/h | 15,000 Btu/h |
| Cooling — Input | 670 W | 1,350 W | 1,300 W |
| Cooling — Current | 4.8/5.3 A | 6.5/7.2 A | 5.7/6.3 A |
| EER2 | 13.5 W/W | 12.8 W/W | 11.5 W/W |
| SEER2 | 22 Btu/h/W | 20.5 Btu/h/W | 19.0 Btu/h/W |
| Heating (Heat Pump/Inverter) — Rated Capacity | 9,000 Btu/h | 12,000 Btu/h | 14,000 Btu/h |
| Heating — Input | 659 W | 1,150 W | 1,110 W |
| Heating — Current | 3.3/3.6 A | 5.2/5.8 A | 4.9/5.4 A |
| COP | 4.0 W/W | 3.80 W/W | 3.70 W/W |
| Indoor Air Flow (Hi/Med/Lo) | 335/279/229 CFM | 335/279/229 CFM | 404/354/300 CFM |
| Indoor Noise Level (Hi/Med/Lo/Silent) | 46/44/40/31 dB(A) | 46/43/38.5/31 dB(A) | 49.5/46/42/31 dB(A) |
| Outdoor Noise Level (Hi) | 63.5 dB(A) | 64 dB(A) | 67 dB(A) |
| Refrigerant Type | R32 | R32 | R32 |
| Refrigerant Charge | 22.93 oz | 31.75 oz | 31.75 oz |
| Design Pressure (Lo/Hi) | 300/580 psi | 300/580 psi | 300/580 psi |
| Indoor Operating Temp (Cooling/Heating) | 62-90 / 32-80 °F | 62-90 / 32-80 °F | 62-90 / 32-80 °F |
| Outdoor Operating Temp (Cooling/Heating) | 32-122 / 25-75 °F | 32-122 / 25-75 °F | 32-122 / 25-75 °F |
| Dimension (WxDxH) | 42x21x16 in | 42x21x16 in | 42x21x16 in |
| Packing (WxDxH) | 44.12x24.5x19.3 in | 44.12x24.5x19.3 in | 44.12x24.5x19.3 in |
| Net/Gross Weight | 93.48 / 102.07 lbs | 98.77 / 107.36 lbs | 98.77 / 107.36 lbs |
Multiple Control Methods
Beyond the included remote control, this PTAC Inverter unit supports the optional 120N wired wall control or the CH-WTH24V smart thermostat (both purchased separately), and the CH-WTH24V is also compatible with any 3rd-party 24V thermostat. Add the free Cooper&Hunter Remote app over Wi-Fi for precise temperature adjustments and optimal climate control from anywhere.
Latest News
If you're thinking about turning your home into a smart home, you're not alone.
Mini Split AC Delivery & Wholesale Terms: Shipping Times for Contractors
B2B Logistics & Freight Mini Split AC Delivery & Wholesale Terms: Shipping Times, Freight Costs & Contractor Bulk Pricing (2026)...
Mini Split Sale & Clearance Deals: Discounted Heat Pumps
Sale & Clearance Mini Split Sale & Clearance Guide: How to Find Genuine Discounts Live Markdowns Factory-Sealed Stock Fast Shipping...
Small Mini Split Dimensions: Exact Wall Clearances for Tight Spaces
Measured Guide 2026 Compact Mini Split Installs: Verified Clearance Specs for Tight Walls When inches matter, Minisplitsforless.com delivers exact clearances...
